top of page
Model Versions
12VDC – Non-Dimable
QTM-ELED-60-UNV/12+N/A-WH (One Driver/Enclosure) |
QTM-ELED-120-UNV/12+N/A-WH (Two Drivers/Enclosure) |
QTM-ELED-180-UNV/12+N/A-WH (Three Drivers/Enclosure) |
12VDC – Dimable
QTM-ELED-60-UNV/12+0-10V-WH (One Driver/Enclosure) |
QTM-ELED-120-UNV/12+0-10V-WH (Two Drivers/Enclosure) |
QTM-ELED-180-UNV/12+0-10V-WH (Three Drivers/Enclosure) |
24VDC – Non-Dimable
QTM-ELED-100-UNV/24+N/A-WH (One Driver/Enclosure) |
QTM-ELED-200-UNV/24+N/A-WH (Two Drivers/Enclosure) |
QTM-ELED-300-UNV/24+N/A-WH (Three Drivers/Enclosure) |
24VDC – Dimable
QTM-ELED-100-UNV/24+0-10V-WH (One Driver/Enclosure) |
QTM-ELED-200-UNV/24+0-10V-WH (Two Drivers/Enclosure) |
QTM-ELED-300-UNV/24+0-10V-WH (Three Drivers/Enclosure) |
24VDC – DMX Dimable
QTM-ELED-100-UNV/24+DMX-WH (One Driver/Enclosure) |
QTM-ELED-200-UNV/24+DMX-WH (Two Drivers/Enclosure) |
QTM-ELED-300-UNV/24+DMX-WH (Three Drivers/Enclosure) |
24VDC – White Dimable
QTM-ELED-100-UNV/24+AW-WH (One Driver/Enclosure) |
QTM-ELED-200-UNV/24+AW-WH (Two Drivers/Enclosure) |
QTM-ELED-300-UNV/24+AW-WH (Three Drivers/Enclosure) |
Q-Tran
®
QTM-DRIVE LED Drivers
Use Q-Tran Drivers to Power IllumiTile®
QTM-DRIVE is an LED power supply for DMX or DALI control, and is available in 12VDC or 24VDC from 60 to 200 watts of power. The QTM-DRIVE utilizes eldoLED LINEARdrive drivers and is suitable for indoor use. Power supplies and modules are pre-wired along with convenient terminal blocks for power and control wiring. The housing can be recessed or surface mounted.
DMX or DALI controllable
Prewired for easy Connectivity
Class 2 output
Can fit up to 2 drivers
Surface or recess mount capable
Four 12VDC or 24VDC controllable outputs per driver
Standby power: < 0.5W
Flicker free operation
Built-in surge protection: 3kV (L to N), 4kV (L/N to GND)
Efficiency: 90% at full load, ≥ 87% above 50W output
Power factor: > 0.94
THD @ full load : <10%
DMX dimming down to 0.1%
Surface or Recessed Mounting
Indoor Use
3 years warranty (from Q-Tran)
CSA #239924 Low Voltage Lighting System
CATEGORY:
Q-Tran
IllumiTile® Applications
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
ULTRA-VERSATILE DESIGN
IllumiTile® Light Engine (ILE) offers an innovative, high quality and very simple solution to create a large, flat LED array for whatever want to you build it into. Edge-lit solutions don’t even come close to the light output capability and versatility of IllumiTile®. Plus, IllumiTile® Light Engines have patented design and are UL Listed.
SIMPLE LAYOUT & CONNECTIVITY
IllumiTile® LED arrays use the same IllumiSnap™ connections that are used in most other IllumiSci© LED lighting system devices. This means that connecting a system can be as simple as snapping together IllumiSci’s® pre-configured devices with IllumiSnap connectors or harnesses.
WIDE DISPERSION
Get very bright, wide and even dispersion (no noticeable spotting) at just one inch from the IllumiTile® array with most 1/4” diffusion materials. The IllumiTile® patented technology makes it possible to configure to your heart’s desire!
ENERGY EFFICIENT
As with all of IllumiSci’s® products, IllumiTile LED arrays offer a lower power, lower heat and reliable “green” solution compared to many other lighting devices. Note that UL Compliance requires using only IllumiSci® UL Listed harnesses with a Class 2 Power supply.
Add a Title
Add a Title
IllumiPower™ is a designation for LED Drivers and power supplies that have been tested and approved to work with IllumiSci® LED devices. No more headaches trying to determine which power supplies will offer clean and stable power for your illumination project as we have prequalified them for you.
APPROVED QUALITY POWER SUPPLIES
IllumiSci® approves and offers only quality power sources to use with IllumiSci® LED devices. Two types are commonly used, “Desktop” power supplies and commercial LED drivers. Both are constant voltage types that allow you flexibility in scaling your LED array
COMMERCIAL LED DRIVERS
LED Drivers are for commercial installations where high-voltage wiring input within a NEMA enclosure is appropriate. The approved Fulham drivers offer 0-10V dimming as a standard, but is optional for use. They are UL Class 2 certified and offer stable power with over current protection. They have bare wire outputs that can connect to a flying lead IllumiSnap harness for easy connection to an IllumiSci®LED device.
Note that UL Compliance requires using only IllumiSci® UL Listed harnesses with a Class 2 Power supply.
IllumiPower™ is a designation for LED Drivers and power supplies that have been tested and approved to work with IllumiSci® LED devices. No more headaches trying to determine which power supplies will offer clean and stable power for your illumination project as we have prequalified them for you.
Add a Title
bottom of page